水泥化粪池模具安装简单和快速释放和可以回收，与传统的模具相比，不需要太多的安装步骤，模具产品强度高、质量好，表面光滑的工厂，使用寿命和化粪池模具大小标准，误差很小，得到了全国各地客户的广泛，是目前化粪池模具行业的新产品。



The cement septic tank mold is easy to install, quickly released and recyclable. Compared with the traditional mold, it does not need too many installation steps. The mold products are factory with high strength, good quality and smooth surface. The service life and septic tank mold size are standard, and the error is very small. It has been widely recognized by customers all over the country. It is a new product in the septic tank mold industry at present.


化粪池模具如果在材料选择方面不下功夫，将会出现整个模具不能使用的情况，材料性能不佳，耐磨性能不够好，都会对其有影响。其次在模具设计和制作工艺有缺陷，凸凹模、锻坯改锻工艺不完善，遗存有热处理隐患，结构设计问题，冲模结构不合理，细长凸模没有设计加固装置，出料口不畅现堆集，制模工艺不完善，热处理技术及工艺有问题，造成凸、凹模淬不透。整个结构包括池体和位于池体上的进污口和出水口，池体内部设有将池体分隔开的隔板，隔板上设有通孔。池体呈圆筒状，其上部设有检查口。相对于普通的池子结构更强，承压力也更强。

If the septic tank mold does not work hard in material selection, the whole mold will not be used. Poor material performance and poor wear resistance will affect it. Secondly, there are defects in the die design and manufacturing process, the transformation process of punch and die and forging blank is imperfect, there are hidden dangers of heat treatment, structural design problems, unreasonable die structure, no reinforcement device is designed for slender punch, the discharge port is not smooth an**cked, the die making process is imperfect, and there are problems in heat treatment technology and process, resulting in the incompleteness of punch and die quenching. The whole structure comprises a tank body and a sewage inlet and outlet located on the tank body. A partition plate separating the tank body is arranged inside the tank body, and a through hole is arranged on the partition plate. The tank body is cylindrical, and its upper part is provided with an inspection port. Compared with the ordinary pool structure, the bearing pressure is also stronger.